http: 192.168.0.8080 data index.html

sponsored links

Router of 192.168.1.1

MAC MAC (Media Access Control, Medium Access Control ) MAC address is burning in the Network Interface Card (NIC, NIC) inside. MAC address, also known as the hardware address is 48 bits long (6 bytes), 16 hex .0-23 bit numbers assigned by the manufacturer

mysql odbc does not recognize 192.168.1.22

Today, the reverse with the power designer mysql database and found that actually can not establish 192.168.1.22 mysql odbc data source, reports: Connection Fialed: [HY000] [MySQL] [ODBC 5.1 Driver] Access denied for user 'xxx' @ '192 .168. 19

Authorized to resolve Host '192 .168.1.180 'is not allowed to connect to this MySQL server

Authorized to resolve Host '192 .168.1.180 'is not allowed to connect to this MySQL server GRANT ALL PRIVILEGES ON *.* TO 'root'@'%' IDENTIFIED BY' mypassword 'WITH GRANT OPTION

RROR 1045 (28000): Access denied for user 'root' @ '192 .168.2.12 (using password:

This is a mysql permissions not reported on a solution: 1, landing mysql, mysql-uroot-hlocalhost-p 2, use mysql (must be the library system) 3, update user set host = '%' where user = 'root'; (can be anonymous and no password will be able

Apache 2.2 + Tomcat 7.0 + jdk-6u23 + MySQL 5.1 + mod_jk + php 5.2.6

Apache 2.2 + Tomcat 7.0 + jdk-6u23 + MySQL 5.1 + mod_jk + php 5.2.6 1. 【If the original server has JDK, you want to uninstall】 Find old jdk command: rpm-qa | grep gcj Executive rpm-e - nodeps java-1.4.2-gcj-compat-1.4.2.0-40jpp.115 And enter the java, if

tomcat clustering & load balancing & session synchronization

Keywords: tomcat clustering, load balancing, session synchronization (A) Environmental description (1) The server has four units, one to install apache, three to install tomcat (2) apache2.0.55, tomcat5.5.15, jk2.0.4, jdk1.5.6 or jdk1.4.2 (3) ip configura

tomcat clustering and load balancing implementation (session synchronization)

(A) Environmental description (1) The server has four units, one to install apache, three to install tomcat (2) apache2.0.55, tomcat5.5.15, jk2.0.4, jdk1.5.6 or jdk1.4.2 (3) ip configuration, a single installation of apache's ip as 192.168.0.88, three

Introduction and configuration of Mysql Cluster

1. Know what you should use the mysql cluster. Pressure to reduce data center nodes, and a large amount of data processing, using the mysql distribution, one or more of the application corresponds to a mysql database. Several mysql database to make p ...

LoadBalance and Cluster in tomcat

Cluster Background 1.1 Definition of terms <br /> service software is b / s or c / s s part of the structure, b or c for the provision of services of software systems. Services that provide computing services hardware hardware, such as pc machine, p

Sort out the practice of clustering and load balancing tomcat

Sort out the practice of clustering and load balancing tomcat (A) of the environment of (1) The server has 4 sets, one to install apache, tomcat installed three (2) apache2.0.55, tomcat5.5.15, jk2.0.4, jdk1.5.6 or jdk1.4.2 (3) ip configuration, a sin

Reverse proxy load balancing (such as Apache + JK2 + Tomcat this combination)

(A) of the environment of (1) The server has 4 sets, one to install apache, tomcat installed three (2) apache2.0.55, tomcat5.5.15, jk2.0.4, jdk1.5.6 or jdk1.4.2 (3) ip configuration, a single installation of apache's ip is 192.168.0.88, install t

tomcat clustering and load balancing implementation (session synchronous) switch

Keywords: tomcat clustering, load balancing, session synchronization (A) of the environment of (1) The server has 4 sets, one to install apache, tomcat installed three (2) apache2.0.55, tomcat5.5.15, jk2.0.4, jdk1.5.6 or jdk1.4.2 (3) ip configuration

tomcat server clusters

Cluster Background 1.1 Definition of terms Services software is b / s or c / s s part of the structure, b or c for the provision of services of software systems. Services that provide computing services hardware hardware, such as pc machine, pc serve

Tomcat6 clustering and load balancing

Cluster background 1.1 Definition of Terms Services software is b / s or c / s s part of the structure, b or c for the provision of services of software systems. Services means the provision of computing services hardware hardware, such as pc machine

MySQL Cluster Introduction and Configuration Detailed

1. To understand whether you should use MySQL Cluster. Nodes to reduce pressure on data centers and large amounts of data processing, using the MySQL distribution, one or more of the application corresponds to a MySQL database. Several MySQL database

php manual performance analysis tools xhprof

xhprof is engaged in a fb php program to analyze the performance of the tool, the use of lightweight convenience. Official Address: http://mirror.facebook.net/facebook/xhprof/doc.html # installation 1, the installation: wget http://pecl.php.net/get/x

The practice of sorting out the tomcat clustering and load balancing

(A) the environment of (1) server with four, one to install apache, tomcat installed three (2) apache2.0.55, tomcat5.5.15, jk2.0.4, jdk1.5.6 jdk1.4.2 or (3) ip configuration, a computer with the apache ip is 192.168.0.88, three install the tomcat server i

tomcat load balancing and clustering configuration

Cluster background 1.1 Definition of Terms Service software is b / s or c / s structure s part is to b or c the provision of services of the software system. Service to provide computing services hardware means hardware, such as pc machine, pc server. Ser

How to use Java to get the real IP address of

How to use Java to get the real IP address of the article Category: Java programming in JSP, the access to the client's IP address is: request.getRemoteAddr (), this method in most cases are valid. However, the adoption of Apache, Squid and other soft

apache + Tomcat load balancing, and the realization of Session Binding

[Change] http://www.cnblogs.com/zhangyi85/archive/2009/04/15/1436786.html Cluster Background 1.1 Definition of Terms Services software is b / s, or c / s structure, s part of the b or c for the provision of services of software systems. Services, har ...

Java access to IP Address: request.getRemoteAddr () alert (change)

In the JSP, the access to client's IP address is: request.getRemoteAddr (), in most cases, this approach is valid. However, the adoption of Apache, Squid and other software can not get reverse proxy to the client's real IP address. If you use ...

mysql cluster configuration, I have been tested

On the Internet for such information was quite hard to find, and Columbia is looking for 2 more days to find a good tutorial, tragedy wow MySql-Cluster Installation System centos5.1 32-bit (how is the 64-bit 64-bit under the corresponding rpm package) htt

Introduce a good web testing tool webbench

In addition to the AB APACHE tools, found a tool webbench under linux is also very good, legend can simulate 30,000 concurrent access. Here Install 1 tar zxvf webbench.tar.gz 2 make Will appear cc-Wall-ggdb-W-O-c-o webbench.o webbench.c webbench.c: 7

MediaWiki on Debian / Linux set up under

In Debian / Linux under 1. Installer sh # apt-get install apache2 sh # apt-get install php5 sh # apt-get install php5-pgsql or apt-get install php5-mysql sh # apt-get install postgresql or apt-get install mysql-server-5.0 sh # apt-get install mediawi

linux redhat rsync configuration

Introduction to rsync tool rysnc is a data mirroring and backup tool with two hosts allow local and remote files, directories between the fast synchronous mirroring, remote data backup and other functions. During the synchronization process, rsync al

Using java to get real ip address

In the JSP, the access to the client's IP address is: request.getRemoteAddr (), in most cases, this approach is valid. However, the adoption of the Apache, Squid and other software can not get reverse proxy to the client's real IP address. If you

Java client real IP address for the two methods

In the JSP, the access to the client's IP address is: request.getRemoteAddr (), in most cases, this approach is valid. However, the adoption of the Apache, Squid and other software can not get reverse proxy to the client's real IP address. If you

Java access to IP address: request.getRemoteAddr () alert (turn)

In the JSP, the access to the client's IP address is: request.getRemoteAddr (), in most cases, this approach is valid. However, the adoption of the Apache, Squid and other software can not get reverse proxy to the client's real IP address. If you

linux system, build one-way replication mysql

First, the test environment CentOS release 5.5 64bit mysql5.0.90 A: master server host name www.caimincun.com IP: 192.168.1.203 B: from the server host name uc.caimincun.com ip: 192.168.1.215 Between the different versions of MySQL (the binary log) binlog

linux system, build mysqlAB replication. two-way replication

First, the test environment CentOS release 5.5 64bit mysql5.0.90 A: master server host name www.caimincun.com IP: 192.168.1.203 B: from the server host name uc.caimincun.com ip: 192.168.1.215 Between the different versions of MySQL (the binary log) binlog

nginx proxy for less than the true client IP

In the Linux environment, the use of strong Nginx - reverse proxy, resulting in use request.getRemoteAddr () to obtain the IP are the company's proxy server IP, logging serious inaccurate! We all know that access to the client server IP address i

Apache + tomcat Linux system integration complete step (b)

Quote 2009-12-27 01:14 V. generate mod_jk.so connector 1. Copy the source package to / usr / local and unpack in the target directory (the directory of course, in the original extract is also possible, in order to regulate so the installation of the

Two linux server ssh trust relationship established between

http://bbs.linuxtone.org/thread-2010-1-1.html Prospects: Yesterday at home, configured to use the command rsync synchronization: # Rsync-avz - progress-e "ssh-p22" root@192.168.22.149: / data / www / wwwroot / / data / www / wwwroot / Copy

7-layer model to understand the network

Application layer: telnet, ftp, http, snmp seventh floor: Presentation Layer: The sixth layer: Session Layer: The fifth layer: ------ Transport Layer: TCP, UDP fourth layer: Network layer: IP Layer: Data link layer: SDLC, HDLC, PPP, STP, Frame Relay Layer

linux configure the FTP service and download through ngnix

useradd rcms Twice to enter the password rcms Create a directory mkdir-p / data/cache1/rcms/download The ftp directory to modify rcms vi / etc / passwd rcms: x: 500:500:: / data/cache1/rcms: / bin / bash Vsftpd configuration changes vi / etc / vsftpd

Apache + tomcat under Linux system integration complete step (b)

Quote 2009-12-27 01:14 V. generate mod_jk.so connector 1 copy of the source package to / usr / local and unpack in the destination directory (the directory where the original of course also possible to extract, so the author is to regulate the instal

linux system, build mysqlAB copy. two-way replication

First, the test environment CentOS release 5.5 64bit mysql5.0.90 A: master server host name www.caimincun.com IP: 192.168.1.203 B: from the server host name uc.caimincun.com ip: 192.168.1.215 As between different versions of MySQL (the binary log) bi

Java to get the real IP address of the client

In the JSP, the access to the client's IP address is: request.getRemoteAddr (), in most cases, this approach is valid. However, the adoption of Apache, Squid and other reverse proxy software can not get to the client's real IP address. If you

java to get the real client IP (reproduced)

ORIGINAL: http://jun-li-leo.iteye.com/blog/751981 We often want to write code to access the page recorded the source page address and the user's access to IP, it will use the following content. js method to obtain the source page address: var url

[Lucene3.0 the first glimpse of] the index file format (3): Field data [. Fdx /. Fdt /. Fnm]

Note: The following article is a see http://lucene.apache.org/java/3_0_1/fileformats.html # Fields and practice of reading out the document summarized. Fields of data storage disk file details Lucene in the data field in memory organized into Document and

Large amounts of data excel file read - excel2007

Cipian is immediately on the chapter "big amounts of data to read excel file - 2003 and earlier versions." excel2007 file format with previous versions, previous versions used by Microsoft's own storage format. 07 versions of the conten ...

Research Report on Oracle Advanced Replication of data

Research Report on Oracle replication data Kwan Chan Time :2010-2-9 Using the scene description: Have a database server running, in order not to affect the usage of the database, a station needs a new database server Kai, the original database data and la

Data into Oracle database volume

SQL * LOADER is a large data warehouse choose to use the load method, because it provides the fastest route (DIRECT, PARALLEL). Now, we put aside the theoretical side, the use of examples to make you quickly master the usage of SQL * LOADER. First of ...

java.net.ConnectException: localhost/127.0.0.1: 8080 solution

Procedures need to send the data to the server, so wrote a servlet to do simple data acceptance testing, but reported the following exception: java.net.ConnectException: localhost/127.0.0.1: 8080 - Connection refused Error code in this section URL url = n

Taobao Open Source Key / Value structure of Technical Analysis of the data storage system Tair (Reprinted)

Taobao Open Source Key / Value structure of Technical Analysis of the data storage system Tair On I just posted on at 12:00 on September 8, 2010 Tair Taobao independently developed by the Key / Value structure of data storage systems, Taobao has a large-s

Android (e) of the five data storage network data exchange 2

3.ClientService class package com.changcheng.web.client.service; import java.io.ByteArrayOutputStream; import java.io.DataOutputStream; import java.io.File; import java.io.FileInputStream; import java.io.InputStream; import java.net.HttpURLConnection

Android (e) of the five data storage network data exchange 3

Which used to HttpRequester class: package com.changcheng.web.client.service; import java.io.DataOutputStream; import java.io.InputStream; import java.net.HttpURLConnection; import java.net.URL; import java.util.ArrayList; import java.util.List; import ja

openJPA1.2.2 data source using the Tomcat6.0.29

Tomcat6.0.29 are two kinds of data sources 1. System wide: all the webapp in the tomcat can use the global data sources, to configure the% TOMCAT_HOME% / conf / context.xml, also make the database jdbc driver, copied to the% TOMCAT_HOME% / lib below.

Taobao Open Source Key / Value structure of Technical Analysis of the data storage system Tair

Tair Taobao independently developed by the Key / Value structure of data storage systems, has a large-scale application in Taobao. Taobao you sign, view product details page or in the Amoy lakes and friends, "noted paste" time, are directly or i

Solr1.4.0 source of (a) solution DataImportHandler large amounts of data from the database into the memory overflow problem (transfer)

http://guoyunsky.javaeye.com/blog/759148 Solr has a very convenient processor called DataImportHandler, can be configured to configure the db-data-config.xml to configure various data sources and then import the data from the index, it is convenient to us
Recent
Recent Entries
Tag Cloud
Random Entries